How to make obiage.

FIG. 1

    FIG. 2

      FIG. 3

      Fold Kanoko in thirds and place the end at the base of the arm. (Before folding, make the groove at part A in Figure 2 deeper.)

        FIG. 4

        Make the groove deeper in part A in Figure 4 and apply glue in advance. First, press the piece into place as a retainer.

          FIG. 5

            FIG. 6

            Cut it to the appropriate length like this, and cut off part B and tuck the ends in so that it doesn't get tangled when the Kanoko comes from the right.

              FIG. 7

              On the other side, just like in Figure 3, deepen groove A and stuff the Kanoko folded in thirds inside.

                FIG. 8

                  FIG. 9

                  As shown in figures 8 and 9, apply glue to the part where the end of the Kanoko will go, then insert the end and press it down.

                    完成

                    Finally, shape it, apply glue to the invisible parts that will float, and secure it in place, and it's finished.