Supplies, parts, accessories for Koinobori, YS type Stand set, pole sold separately(With reinforcing angle)

This is a recommended guide to koi nobori parts suggested by a specialty store for those who find the manufacturer's genuine product lacking, have lost some parts, or have broken them.

• If you have difficulty installing on a balcony, this is for you.
• Base size: 60cm x 35cm
  
• The component image will include a reinforcement angle.
• The overall image is shown without the reinforcement angle.

• Point 1	● The angle can be adjusted to some extent freely.
  Point 2	● It extends the length of your existing balcony pole by approximately 100cm.
  Point 3	● Sturdy metal frame. With a 60cm angle, it has further stability.
  Point 4	● Depending on the purpose, the mounting position of the reinforcement angle can be changed.
  Point 5	● With two 10-liter water tanks, it remains stable.
  Point 6	● A support rope and a sheet to prevent balcony damage are included to stabilize it further.
  Point 7	● Easy to assemble.
  Note!!	● The inner diameter of the pipe (adapter) where the pole is attached is 26mm.
  Note!!	● The pole is compatible with 5-piece connections of approximately 25mm and 4-piece connections of approximately 21mm. If using a 25mm pole, please attach the included adapter. It cannot be used with roots exceeding 25mm in diameter. Also, if using a pole narrower than the inner diameter, please wrap something around the pole to adjust the diameter.
  Note!!	If the root of the balcony pole does not have a hole, it cannot be secured with screws. This pole is applicable. Alternatively, if the koi nobori is a set of 1.5m or 2m, this stand may also be usable.